SOLUBLE CUTTING OIL
EGI Soluble Cutting oil is premium quality chlorine-free, borate-containing soluble cutting oil. It is designed for light to moderate machining operations including boring, milling, drilling, tapping, threading, broaching, turning, reaming and grinding.
EGI Soluble Cutting oil is multipurpose, neat cutting oil for turning, milling, reaming, drilling, shaping, broaching of a wide variety of metals. It has outstanding emulsion stability and readily mixes with water. It is recommended at 10:1 up to 20:1 water oil dilution for milling, boring and turning and 40:1 for grinding. The emulsion is prepared by adding oil to water and not vice versa. It is non-staining and can be used on both ferrous and non-ferrous metals.
FEATURES & BENEFITS:
- Gives excellent surface finish on parts.
- Good oxidation stability.
- Corrosion and rust protection of parts and machine
- Excellent cooling properties that avoid overheating of parts and chips in the machining operation
- Reduce tool wear
- Helps prevent varnish and sludge formation
- Non-staining to ferrous and non-ferrous metals.
- Increase tool life and faster machining.
|Characteristics||Test Method||ISO VG-68|
|Sp. Gravity @ 15 °C||ASTM D4052||0.895|
|Viscosity @ 40 °C, cSt||ASTM D445||67.5|
|Rust Prevention Breakpoint||IP-287||20:1|
|PH of Emulsion||ASTM D1287||9.30|
HEALTH & SAFETY, ENVIRONMENT:
Prolonged and repeated contact with oil may cause skin disorders. Avoid contact. Wash immediately with soap and water. Do not discharge used oil into drains or the environment. Dispose to an authorized used oil collection point. For further Information on Safety Guidelines please refer to MSDS available on our website www.EgiMiddleEast.com.
1324-A, Block-C1, Ajman Free Zone, Ajman, UAE. www.egimiddleeast.com